gondola-la

And now for my second soprano ukulele with nylon strings and a supercalifragilistic coordinated theme!gondola3Yes folks, it’s all gondolas all the time.gondola1 gondola2gondlolas on the back gondola backa fero da prorà on the head stock gondola headgondolas bobbing along the sides gondola sideand gondolas on the silk neck tie strap! Expialidocious or what? gondola strapHold on to your socks! Jeannie may just puff out of that bottle on the strap and whisk you off to Venice in a hula skirt.

  • tin: 210 x 50 mm, 6 1/4 x 2 in.
  • scale length: 330 mm, 13 in.
  • head to tail: 550 mm, 21 3/4 in.
  • G .025, C .036, E .032, A .021 nylon
  • maple neck
  • padauk fret board
  • silver plate fork string anchor and arm rest
  • silk neck tie strap

Gondola-la is a one of a kind ensemble. The stars will never line up like this again. She’s all yours for $360. Get on board or send a message in a bottle if you are interested.

gondola-la from The Tinkers Damn on Vimeo.

big red baritone

bigred1

bigred2

bigred3Big red, and a baritone, no less! My first go at a baritone scale ukulele used a 10 inch snowflake tin with the same art design as big green, a concert ukulele from some time ago. The similarities end there. Big red has a 520 mm scale length and a voice that is an octave lower. For my own convenience big red is strung and tuned in a typical ukulele GCEA so I can play it without fussing to learn the chords for the standard baritone ukulele tuning of DGBE. If there is anyone out there interested in big red and would prefer DGBE I would certainly be amenable to swap in a set of strings for that tuning. Meanwhile, I am getting a kick out of the deeper voice and I am sure I’ll be using the big ten inch tins for more baritones to come.

  • tin: 250 x 90 mm, 9 7/8 x 3 1/2 in.
  • scale length: 520 mm, 20 1/2 in.
  • head to tail: 780 mm, 30 1/2 in.
  • G .022 wound, C .032 wound, E .026 wound, A .018 plain steel loop
  • or for a standard baritone tuning: D .030 wound, G .022 wound, B .017 plain, E .012 plain steel loop
  • maple neck
  • teak fret board
  • stainless fork string anchor
  • silk neck tie strap

Get this low down ukulele all for just $320! It’s all about the bass so drop me a depth charge if you are interested.

big red from The Tinkers Damn on Vimeo.

faded blue

faded blue 1 faded blue 2 faded blue 3It’s been a while coming, but the blue was already faded when I started. After tinkering with a chassis punch on the flying iris I thought I’d put it to use on a bigger tin. This uke projects its hoot and holler right out front thanks to the six sound holes in the belly. She’s bound to keep the blues away.

  • tin: 255 x 100  mm, 10 x 3 7/8 in.
  • scale length: 380 mm, 15 in.
  • head to tail: 645 mm, 25 1/2 in.
  • G .010, C .015, E .011, A .008 steel loop
  • maple neck
  • paduak fret board
  • stainless fork string anchor
  • neck tie strap

Faded blue will punch right through those clouds and let the big brass sun right in, all for just $320! Drop me a line if you are interested.

faded blue from The Tinkers Damn on Vimeo.

flying iris

flying iris 3What? A soprano ukulele? Yes, and with nylon strings no less!

flying iris 2

flying iris 1

flying iris 4Time to branch out a bit from exclusively steel strings on concert scale ukuleles. tindeco This little Tindeco oval was aching to be an instrument but it’s size kept me away. After the requests and suggestions that I use nylon strings for a more familiar feel, I figured a li’l sorpano uke with nylon strings would fit this tin nicely. Some day soon I’ll turn out a baritone ukulele too. Meanwhile, some specs for flying iris…

  • tin: 215 x 145 x 45 mm, 8 1/2 x 5 5/8 x 1 3/4 in.
  • scale length: 330 mm, 12 3/4 in.
  • head to tail: 510 mm, 20 in.
  • G .020, C .032, E .030, A .022 Nylon
  • maple neck
  • teak fret board
  • sterling fork string anchor
  • silk neck tie strap

Flying iris is a swell little gal with a nice voice and easy on the fingers to boot! All for $260. Drop me a line if you are interested.

flying iris from The Tinkers Damn on Vimeo.

big texas blue #2

big tex blue 2.3big tex blue 2.4 big tex blue 2.2I had a small windfall of Texas Bluebonnet tins from the Collin Street Bakery so I followed up the wee texas blue with a new big texas blue. It is very similar to the first one of these big tins I hammered out in June of 2013. This is the fifth ukulele I’ve built with these pretty tins and it would make a swell duet pair with the wee texas blue while she is still available (hint, hint). The history of the state of Texas plays out on the sides of this whopper and just like on the wee one, the state flower and a rudimentary map grace the lid. Big texas blue has a big ol’ voice to match a big ol’ state

  • tin: 255 x 90 mm, 10 x 3 1/4 in.
  • scale length: 380 mm, 15 in.
  • head to tail: 650 mm, 25 1/2 in.
  • G .010, C .015, E .011, A .008
  • maple neck
  • cocobolo fret board
  • sterling fork and rest
  • silk neck tie strap

She’s all yours for just $320. Contact me if you are interested.

big texas blue #2 from The Tinkers Damn on Vimeo.

wee texas blue

wee tex blue 3 wee tex blue1 wee tex blue2At last I am back to work and making some new instruments! I have not completed a new one since February, too many other projects and distractions. This little Texas Bluebonnet tin from the Collin Street Bakery was a fine choice for getting back to the rasps and hammers. This is the fourth ukulele I’ve built with these pretty tins. I’ve used the big ones and the medium ones, but this is my first go with a wee one. The history of the state of Texas plays out on the sides while the state flower and a rudimentary map grace the lid. She’s a big winner in a diminutive size!

  • tin: 170 x 77 mm, 6 3/4 x 3 in.
  • scale length: 380 mm, 15 in.
  • head to tail: 620 mm, 24 1/2 in.
  • G .010, C .015, E .011, A .008
  • maple neck
  • teak fret board
  • stainless fork and rest
  • silk neck tie strap

She’s all yours for just $280. Contact me if you are interested.

wee tex blue from The Tinkers Damn on Vimeo.

black rose

black rose 1 black rose 2 black rose 3Boy, I tell ya, I am starting to really like these medium size tins for concert scale ukuleles. They work like a charm. I suppose I will have to start working the big 10 inch tins into baritone ukuleles instead. Don’t miss the wild colors of the polka-dot liner inside this silk neck-tie strap. You can just see the pattern peeking out of the right side of the top photo. The mottled patina in the steel of the cookie tin bottom gives black rose a world-wise personality, and the fleurs-de-lis on the tin and arm rest give her a mild, regal bearing. She’s a special gal!

  • tin: 185 x 65 mm, 7 1/4 x 2 1/2 in.
  • scale length: 380 mm, 15 in.
  • head to tail: 620 mm, 24 1/2 in.
  • G .010, C .015, E .011, A .008
  • maple neck
  • cocobolo fret board
  • stainless fork and rest
  • silk neck tie strap

Sorry folks, Black Rose was sold at the San Luis Obispo Maker Faire, May 10, 2014. We had a really swell volunteer for the day who picked up a uke for the first time at the Faire. She learned a few chords from me and many more plus a few songs from other uke players who happened by. By the time she had to go for the day she was ready to make this uke her own. If our volunteer is reading this… thank you so much for all the help and enthusiasm getting other people to try out an instrument and I hope your new instrument brings years of strumming.

Lapp Woman

Lapp Woman 1 Lapp Woman 2 Lapp Woman 3The lid of this tin depicts a scene from the Hans Christian Andersen story of the Lapp Woman and the Finn Woman, a part of The Snow Queen. Gerda, carrying a dried cod (it looks more like a sturgeon to me), is riding a reindeer on her way to see the Finn Woman. Oddly, the fish has a message written on it. Be that as it may, the resulting ukulele came out of the shop sounding really swell, and what’d ya know, no fish odor!

  • tin: 190 x 90 mm, 7 3/4 x 3 1/2 in.
  • scale length: 380 mm, 15 in.
  • head to tail: 620 mm, 24 1/2 in.
  • G .010, C .015, E .011, A .008
  • maple neck
  • paduak fret board
  • stainless fork and rest
  • silk neck tie strap

Sorry folks, Lapp Woman sold to a nice fella and his daughter in San Mateo in March 2014. She’s a pretty gal and she’s out in the world now. She’ll make more people smile out making music by someone’s hand than she ever would in my storage so I’m happy to send her on her way. Never fear, there will be more like her.

hope tambourine

tamborine1 tamborine2 tamborine3

Percussion and twang all in one instrument.

  • tin dimensions: 8 x 3 3/8 inches
  • scale length: 390 mm, 15 3/8 inches
  • head to tail: 630 mm, 24 3/4 inches
  • G .010, C .015, E .011, A .008
  • maple neck
  • padauk fret board
  • silk neck tie strap
  • open head tuning machines
  • five sets of tambourine bells

All for just $200. Sorry folks, this one has been promised to the San Luis Obispo Classical Academy for their 2014 annual fund raising auction on March 15th.

 

goldie

goldie1 goldie2 goldie3

Old goldie was built in March of 2011. That makes her one of the early ones, but she plays a lovely steel twang on a concert uke scale.

  • tin dimensions: 7 3/4 x 2 1/4 inches
  • scale length: 390 mm, 15 3/8 inches
  • head to tail: 615 mm, 24 1/4 inches
  • G .010, C .015, E .011, A .008
  • maple neck and fret board
  • sterling fork and arm rest
  • open head tuning machines

This one went as a gift to a friend of my sister. I’m sure Goldie will be twanging in his hands for many happy years to come.